How to charge batteries with turnigy maxbow?

To charge the battery all the equipment purchased REAL Turnigy MaxBow model, this model different types of battery charging also has a process with which you can download these, this model has been acquired by the team in order to charge the large gamma batteries have in the laboratory, which use batteries for example dandelion, minidandelion, among others.
The manufacturer's specifications are as follows:
The Turnigy MAX80W is an upgrade of a entry level balancing charger and discharger Which can handle up to 6 cells and 7A.
The touch pad style Turnigy MAX80W will handle LiPo / LiFe up to 6S and NiMH / NiCd up to 15S and shows single cell voltage charge with realtime updates During Throughout The charge cycle.

Features;
Microprocessor controlled
Delta-peak sensitivity (NiMH / NiCd)
Individual cell balancing
Li-ion, LiPo and LiFe capable
Ni-Cd and NiMH capable
7A Max charge current
Store function, Allows safe storage current
Time limit function
Input voltage monitoring. (Protects car batteries at the field)
Data storage (Store 5 packs in memory)
Battery break in and cycling.

Spec.
Input Voltage: 10 ~ 18v
Circuit power: Max Charge: 80W / Max Discharge: 5W
Charge Current Range: .1 ~ 7.0A
Discharge current range: 0.1 ~ 1.0A
Ni-MH/NiCd cells: 1 ~ 15
Li-ion/Poly cells: 1 ~ 6
Pb battery voltage: 2 ~ 20v
Weight: 300g
Dimensions: 135x100x40mm
This charger has a JST-XH charge plug, Which makes it Compatible with Zippy, HXT, TURNIGY and any pack with a JST adapter.

Turnigy MaxBow brings a series of adapters which we facilitate the process of making our own cables to charge the batteries, but just had to make a cable to charge a special type batteries are very small
Then we will show a tutorial on how to occupy the product.
  

Steps for the Turnigy funcionamientto of MaxBow
 

• The first step was to connect the charger to a power supply, the input voltage was 15 V, because according to the manual from 11V to 19V accepts, the charger is lit in this we find a number of options such as:

• The boot menu has 6 options: 
• Load Data 
• Save Data 
• P6 Batt  
• NICD Batt 
• NIMH Batt  
• Lipo Batt

• We entered the option Lipo Batt.

• Within this menu there were other options such as:
• Lipo Charge
• Lipo Discharge

• Selected Lipo Charge

• Select the Corresponding voltage and amperage. Depending on our batteries. 

• Now it's time to start charging for this hold down the play button for 3sec and begins charging the batteries, if you hold the button to throw an error that we have everything we need to look well connected.

• After 10 minutes with a tester found that the battery is charging.tes with a tester found that the battery is charging.